Radiography icon

Radiography / Fluoroscopy

Radiography and fluoroscopy systems require regular acceptance and consistency testing to maintain stable and reproducible image quality.
This category includes phantoms engineered to evaluate essential performance parameters, verify compliance with IEC, DIN, AAPM standards, and support routine QA workflows.

      — Marked models are compatible with Diagnomatic for automated test analysis and reporting.
A flat, square object made of white plastic with printed symbols on the top cover and transparent con at the middle.
Pro-Digi
The Pro-Digi phantom is dedicated for acceptance and constancy tests of digital radiography equipment.
A flat, square object made of white plastic with printed symbols on the top cover and transparent con at the middle.
Pro-Fluo 150
The Pro-Fluo 150 phantom is dedicated for acceptance and constancy tests of radiography and fluoroscopy equipment according to the new DIN 6868-150 standard.
A thick rectangular object made of white plastic with an attached 6m long rubber transparent hose and black rubber hand pump at the end.
Pro-RF DSA
A special phantom for Quality Assurance of Digital Subtraction Angiography Equipment (DSA) according to IEC 61223-3-3 and DIN6868/Parts 8, (2007) and 54.
Three square blocks made of sandblasted transparent plastic standing in a row.
Pro-RF Res 150
The phantom for acceptance and constancy testing of Cone-Beam CT / Volume Tomography (DVT) in fluoroscopy according to DIN 6868-150.
A flat square object made of transparent plastic with a grid in the middle.
Pro-RF Contrast
The Contrast-Detail (CD) phantom makes it possible to quantify both detail and contrast as observed by the radiologist.
A set that contains a flat rectangular object made of white plastic with a printed top, a square copper filter plate, a small transparent cone and a small table-shaped object with a resolution plate in the middle.
Pro-RF Basic Tool
The Pro-RF BacisTool phantom is a compact general radiography image quality testing phantom.
A set containing a flat circular object made of white plastic with printed patterns and symbols on top and two square thin copper plates.
Pro-RF Fluo 18
The phantom for evaluation of imaging performance of fluoroscopic systems. It allows brightness and contrast adjustments, circular geometry check (scanning linearity) plus wide-range low-contrast and high-contrast resolution evaluation.
A set containing a flat circular object made of white plastic with printed patterns and symbols on top and two square thin copper plates.
Pro-RF CDR
The phantom for evaluation of imaging performance of radiographic systems.
An square flat object made of transparent plastic containing brass mesh inside, copper wedge, resolution plate, and transparent cone at the middle.
Pro-Alpha
The Pro-Alpha phantom can be used for carrying out acceptance and constancy tests of conventional radiography X-Ray units.
A rectangular copper object with engraved scales on the top surface, a small transparent plastic cone, and a big transparent plastic cylinder.
Pro-RF Geometry
This device readily indicates a 1% or 2% misalignment at a 1 m focal-film distance (FFD), but it can be used at any FFD. It consists of aflat 20 x 25 cm plate with a 14 x 18 cm pattern etched on its surface.
A square object, the top half made of transparent plastic, the bottom half made of white plastic, lead mesh located inside, and a transparent cone in the centre of the top cover.
Pro-RF AlphaG
The Pro-RF AlphaG phantom is a simple tool to check geometry of the R/F system: collimation / beam alignment and position and size of the effective radiation field.
Two long rulers made of transparent plastic screwed together in the middle creating a cross.
Pro-RF Ruler
The radiopaque ruler in the image provides a permanent reference of image size.
A tower of octagonal plates made of sandblasted acrylic, set in a frame of the same material.
Pro-RF XR21
The phantom has been designed in accordance with the NEMA XR21 standard. This modular phantom made of PMMA consists of several plates allowing variation of phantom thickness setup in steps of 25 mm, up to a total of 300 mm, simulating a range of patient sizes.
Set of 6 square acrylic plates, including one thick, and two thin aluminum plates.
Pro-RF AAPM 31
A set of acrylic and aluminium filters for testing diagnostic X-rays according to AAPM recommendations from ReportNo. 31 ”Standardized Methods for Measuring Diagnostic X-Ray Exposure”.
A set of 6 rectangular and 2 square plastic elements, a square metal plate, and a plastic 6-step wedge.
Pro-RF AAPM 15
This Digital Subtraction Angiography (DSA) Phantom follows the recommendation in Report No. 15 by the AAPM (American Associationof Physicists in Medicine) - Digital Radiology/Fluorography Task Group of the Diagnostic X-Ray Imaging Committee.
A set that consists of 10 square PMMA plates, a stand, 1 copper and 2 aluminium square plates, and 2 circular phantoms.
Pro-RF FluoCDRH
The compact and easy to use phantom for performance evaluation of fluoroscopic systems according to Center for Devices and Radiological Health (CDRH) specifications.
A rectangular frame made of transparent PMMA with two square aluminium plates mounted inside on opposite walls.
Pro-RF ChestCDRH
The compact and easy to use phantom designed to invoke a response of automatic-exposure.
A rectangular object composed of 4 layers: the upper and lower U-shaped ones with thickened sides made of white plastic, inside a smaller layer of the same shape made of lead and a square tungsten plate in the center.
Pro-RF MTF
The edge test device according to IEC 62220-1 for determination of Modulation Transfer Function that consists of a tungsten plate fixed on a lead plate.
A rectangular head, made of U-shaped white plastic and a square tungsten plate, attached to a rectangular plastic base so that the angle of the head can be adjusted.
Pro-RF MTF MINI
The edge test device according to IEC 62220-1 for determination of Modulation Transfer Function.
A transparent acrylic cylinder.
Pro-RF FocalSpot
A simple test device for the focal spot size evaluation. It consists of a precision bar pattern placed at the end of the cylinder that provides accurate and reproducible target-to-image receptor spacing.
A flat square object made of white plastic with a printed top surface.
Pro-RF HighRes
The test phantom for evaluation of high contrast resolution of fluoroscopy system in one exposition. It consists ofeight patterns of wire mesh in a pie shape.
A pile of 11 square acrylic plates.
Pro-RF AEC PMMA
A set of acrylic plates for testing Automated Exposure Control of radiography equipment.
Two square, thin copper plates.
Pro-RF AEC Cu
A set of high purity copper plates for testing Automated Exposure Control of radiography equipment. It can be mounted near the X-Ray tube and used instead of PMMA plates.
Foldable ruler made of transparent plastic with engraved detailed X-Ray opaque scale and stainless steel step.
Pro-RF Tomo
A set of simple tools dedicated for measurements on tomography X-Ray equipment. It can be used for the layer height adjustment and tomography movement tests.
A set consisting of a long, rectangular, flat object made of one lead layer between two layers of white plastic with a row of five pass-through holes, and two similar shorter rectangular objects without holes.
Pro-RF GridAlign
This device improves alignment of the radiographics and central beam of the x-ray tube. It is designed to test proper grid alignment with respect to the central beam.
A rectangular, flat object made of white plastic with a printed top surface.
Pro-RF Contact
A test grid for testing cassette film – screen contact.
An aluminium step wedge with a copper stripe on the side with engraved numbers.
Pro-RF 21 Steps
A 21 step aluminium wedge for determination of the dose reproducibility and sensitometric curve shape, speed and mid-gradient of X-Ray screen-film radiography systems.
An aluminium step wedge.
Pro-RF 11 Steps
A 11 step aluminium wedge for evaluation of dynamic range of digital or film-screen systems.
A trapezoidal aluminium element that constitutes the tool head connected to the adjustable rod.
Pro-RF Rack
A phantom holder for Pro-Alpha, Pro-Digi and Pro-Fluo test phantoms for mounting on Bucky grid wall stands. It allows precise and safe positioning.
A square, flat object made of white plastic, with a square hole in the middle and a set of four aluminium attachable legs.
Pro-RF Stand
A spacer plate with adjustable legs for positioning Pro-Alpha and Pro-Digi test phantoms near the X-Ray tube on units without insertion slots (e.g. over-table / under-table tubes, C-arms etc.).
A set made of a square aluminium block, a square copper thin filter, and two thumbscrews.
Pro-RF Al 25
A 25 mm aluminum filter with insertion frame for mounting near the X-Ray tube.
A set made of a square aluminium block, a square copper thin filter, and two thumbscrews.
Pro-RF Al 21
A 21 mm aluminum filter with insertion frame for mounting near the X-Ray tube.
A set made of a square aluminium block, a square aluminium thin filter, and two thumbscrews.
Pro-RF Al 21M
A 2-in-1 solution that allows to get two attenuation thicknesses with one device: 21 mm or 25 mm. Includes insertion frame for mounting near the X-Ray tube.